SINGER 3342 Fashion Mate Interactive Manual
Interactive instruction manual by Singer Sewing Outlet

Live Sewing Advisor - free for our customers: ask any sewing question about your 3342 and get an answer straight away, 7 days a week. Log in to your order page to use it, or get 30 days' instant access for a one-off £10.

Log in30 days - £10 one-off

Your SINGER 3342 Fashion Mate

Singer's instructions rewritten in plain English, with every setting kept exactly as Singer intended, and with tips from our team added along the way. Stuck on something? Ask the Live Sewing Advisor at any point.

This manual applies to UK spec machines.

SINGER Fashion Mate 3342
SINGER Fashion Mate 3342

Watch Singer’s owner’s class

A full walk-through of your machine from Singer - setting up, threading, winding the bobbin and your first stitches. Short videos for each step are in the sections below.

Please note: the model number shown in the video may vary, as it was made in the US, but the functions are the same as your model.

Important - please read: getting the best out of your machine

The questions our customers ask us most - worth two minutes before you start.

  1. 💡
    Straight stitch? Stitch width dial on 0
    There is no separate needle position dial. For straight stitch the stitch width dial sets the needle position: 0 is the centre, 6 is fully left. Keep it on 0 for normal seams.
  2. 💡
    Blue and red stitches need S1 or S2
    For the blue and red stitches on the pattern selector dial, turn the stitch length dial to S1 or S2 first, as the stitch chart shows.
  3. 💡
    Darning plate for free-motion quilting
    The 3342 uses a darning plate instead of lowering the feed dogs. For free-motion work and sewing on buttons, fit the darning plate over them - and take it off again for normal sewing.
  4. ⚡
    Switch off before you thread or change anything
    Turn the power switch to O (off) before threading, changing the needle or foot, or taking out the bobbin.
  5. 📦
    Keep the box and packaging
    Please keep the box and packaging for your machine, should it ever need to be sent away for servicing or repair.
  6. 🔄
    Stitching problems? Rethread first
    If you ever have an issue with stitching, tension, looping or jamming, the first thing to do is rethread the machine. If the issue persists, change the needle and bobbin, clean out the bobbin area, and make sure no thread is stuck anywhere in the thread path or in the bobbin area. If you have tried all of these and are still having issues, please do get in touch with our support team.
  7. 🧹
    Keep the bobbin area clean
    We recommend you clean out your bobbin area with a brush or cotton bud every 4 to 6 bobbin changes, to keep your machine free of lint and debris.
  8. 🔄
    Change your needle
    To keep your machine stitching perfectly, we recommend changing your needle every 6 to 8 hours of sewing. We supply needles in different sizes and for different types of materials - including stretch, jeans/denim, leather, and multiple sizes of universal needles to suit the weight of the fabric.
  9. 🧵
    Use good thread
    Always try to use good quality branded threads such as Gutermann, Coats, Hemline or Mettler. Avoid non-branded threads, such as ones found in supermarkets or on some online marketplaces.
  10. ✅
    Use the correct bobbin
    With very few exceptions, Singer machines use Class 15 plastic bobbins. Always use the type that came with your machine - we recommend genuine bobbins only. Even slight differences in bobbin size or weight can cause the machine not to stitch correctly.
  11. ⚙
    Let the machine feed the fabric
    Modern machines have extremely good feeding mechanisms, designed to pull the fabric through the machine for you. Try to avoid pulling the fabric through to the point of bending the needle, as this can cause the needle to strike the bobbin case or needle plate.
  12. 💬
    We are here to help
    Always feel free to message us for help and advice on how to get the best out of your machine.

Getting to know your machine

Important safety instructions

This household sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594. When using any electrical appliance, basic safety precautions should always be followed, including the ones below. Read all the instructions before using this sewing machine. Keep them somewhere handy near the machine, and pass them on if you give the machine to someone else.

DANGER - to reduce the risk of electric shock

  • Never leave the machine unattended while it is plugged in. Always unplug it from the socket straight after use, and before cleaning, removing covers, oiling or making any other adjustment mentioned in this manual.

WARNING - to reduce the risk of burns, fire, electric shock or injury

  1. Do not let the machine be used as a toy. Take close care when it is used by or near children.
  2. Only use the machine for its intended purpose, as described in this manual. Only use attachments recommended by the manufacturer, as listed in this manual.
  3. Never use the machine if the cord or plug is damaged, if it is not working properly, or if it has been dropped, damaged or dropped into water. Take it to your nearest authorised dealer or service centre to be examined, repaired or adjusted, electrically or mechanically.
  4. Never use the machine with any of its air openings blocked. Keep the ventilation openings of the machine and the foot control free from lint, dust and loose cloth.
  5. Keep your fingers away from all moving parts. Take special care around the needle.
  6. Always use the correct needle plate. The wrong plate can cause the needle to break.
  7. Do not use bent needles.
  8. Do not pull or push the fabric while sewing. It can bend the needle and make it break.
  9. Wear safety glasses.
  10. Turn the power switch to O (off) when making any adjustments in the needle area - threading the needle, changing the needle, threading the bobbin, changing the presser foot and so on.
  11. Never drop or insert any object into any opening.
  12. Do not use outdoors.
  13. Do not use where aerosol (spray) products are being used or where oxygen is being given.
  14. To disconnect, turn all controls to off (O), then take the plug out of the socket.
  15. Do not unplug by pulling the cord. Hold the plug, not the cord.
  16. The foot control is used to run the machine. Do not put anything else on the foot control.
  17. Do not use the machine if it is wet.
  18. If the LED light is damaged or broken, it must be replaced by the manufacturer, its service agent or a similarly qualified person, to avoid a hazard.
  19. If the cord connected to the foot control is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person, to avoid a hazard.
  20. This sewing machine is double insulated. Only use identical replacement parts - see Servicing double insulated products below.

In the UK and Europe

  • This machine can be used by children aged 8 and over, and by people with reduced physical, sensory or mental capabilities or without experience and knowledge, if they are supervised or have been shown how to use it safely and understand the hazards involved.
  • Children must not play with the machine.
  • Cleaning and user maintenance must not be done by children without supervision.
  • The noise level in normal use is less than 75dB(A).
  • Only use the foot control supplied with the machine, or one supplied by an approved SINGER retailer.

Servicing double insulated products

A double insulated product has two systems of insulation instead of an earth. It has no earth connection, and one must not be added. Servicing it needs great care and knowledge of the system, and should only be done by qualified service staff. Replacement parts must be identical to the parts in the product. A double insulated product is marked "DOUBLE INSULATION" or "DOUBLE INSULATED".

NoteThis sewing machine is for household use only. Please keep these instructions. This manual can be printed.

Parts of the machine - front

  1. Thread tension dial
  2. Thread take-up lever
  3. Thread cutter
  4. Presser foot
  5. Needle plate
  6. Removable accessory tray (accessory storage)
  7. Reverse sewing lever
  8. Bobbin stopper
  9. Stitch width dial
  10. Stitch length dial
  11. Pattern selector dial
  12. One-step buttonhole lever
  13. Automatic needle threader

Unpacking

  • Put the box on a steady, flat surface. Lift the machine out of the box and take off the outer packaging.
  • Remove all the other packing material and the plastic bag.
Drawing from the SINGER manual

Parts of the machine - back

  1. Horizontal spool pin
  2. Bobbin winding spindle
  3. Hole for a second spool pin
  4. Handwheel
  5. Power and light switch
  6. Main plug socket
  7. Bobbin thread guide
  8. Upper thread guide
  9. Face plate
  10. Carrying handle
  11. Presser foot lifter
  12. Foot control (speed)
  13. Power cord
Drawing from the SINGER manual

The rest of this manual is for our customers

26 more sections, including step-by-step guides, stitch settings and troubleshooting.

The full manual and our Live Sewing Advisor come free with every machine we sell.

Order a Singer 3342 Fashion MateAlready a customer? Log in

Bought your machine somewhere else? Get the full manual, plus our Live Sewing Advisor for any sewing question, for 30 days.

Get 30 days' access - £10 one-off

A one-off payment of £10 for 30 days - no subscription. Instant access by email, including every interactive sewing machine manual we have.