Your SINGER C430 Professional
Singer's instructions rewritten in plain English, with every setting kept exactly as Singer intended, and with tips from our team added along the way. Stuck on something? Ask the Live Sewing Advisor at any point.
This manual applies to UK spec machines.
Main things to know
Getting to know your machine
Important safety instructions
Read all the instructions before using this household sewing machine. When using an electrical appliance, basic safety precautions should always be followed, including the ones below. This machine is designed to comply with IEC/EN 60335-2-28 and UL1594.
- Keep the instructions in a suitable place close to the machine, and pass them on if the machine is given to someone else.
DANGER - to reduce the risk of electric shock
- Never leave the machine unattended while it is plugged in. The socket the machine is plugged into should be easy to reach. Always unplug the machine from the socket straight after use, and before cleaning, removing covers, oiling, or making any other adjustment mentioned in this manual.
WARNING - to reduce the risk of burns, fire, electric shock or injury
- Do not let the machine be used as a toy. Take close care when it is used by or near children.
- Only use the machine for its intended purpose, as described in this manual. Only use attachments recommended by the manufacturer, as listed in this manual.
- Never use the machine if the cord or plug is damaged, if it is not working properly, or if it has been dropped, damaged or dropped into water. Take it to your nearest authorised dealer or service centre to be examined, repaired or adjusted, electrically or mechanically.
- Never use the machine with any of its air openings blocked. Keep the ventilation openings of the machine and the foot control free from lint, dust and loose cloth.
- Keep your fingers away from all moving parts. Take special care around the needle.
- Always use the correct needle plate. The wrong plate can cause the needle to break.
- Do not use bent needles.
- Do not pull or push the fabric while sewing. It can bend the needle and make it break.
- Wear safety glasses.
- Turn the power switch to O (off) when making any adjustments in the needle area - threading the needle, changing the needle, threading the bobbin, changing the presser foot and so on.
- Never drop or insert any object into any opening.
- Do not use outdoors.
- Do not use where aerosol (spray) products are being used or where oxygen is being given.
- To disconnect, turn all controls to off (O), then take the plug out of the socket.
- Do not unplug by pulling the cord. Hold the plug, not the cord.
- The foot control is used to run the machine. Avoid putting anything else on the foot control.
- Do not use the machine if it is wet.
- If the LED light is damaged or broken, it must be replaced by the manufacturer, its service agent or a similarly qualified person, to avoid a hazard.
- If the foot control cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person, to avoid a hazard.
- This machine is double insulated. Only use identical replacement parts. See Servicing double insulated products below.
- Do not pull the front cover off the machine.
- Only use the foot control supplied with the machine, or one supplied by an approved SINGER retailer.
For Europe
This appliance can be used by children aged 8 and over, and by people with reduced physical, sensory or mental capabilities or lack of experience and knowledge, if they have been given supervision or instruction on using it safely and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance must not be done by children without supervision. The noise level in normal use is less than 70dB(A).
Servicing double insulated products
A double insulated product has two systems of insulation instead of an earth. No earth is provided, and none should be added. Servicing needs great care and knowledge of the system, and should only be done by qualified service staff. Replacement parts must be identical to the parts in the product. A double insulated product is marked "DOUBLE INSULATION" or "DOUBLE INSULATED".
UK mains plug
This product is suppressed for radio and television interference to the International Electrotechnical Commission requirements of the CISPR. The wires in the mains lead are coloured: blue - neutral (N), brown - live (L). If the colours do not match the markings in your plug:
- The blue wire must be connected to the terminal marked N or coloured black.
- The brown wire must be connected to the terminal marked L or coloured red.
- If a 13 Amp (BS 1363) plug is used, a 3 Amp fuse must be fitted. With any other type of plug, a 5 Amp fuse must be fitted in the plug, the adaptor or at the distribution board.
- Neither wire is to be connected to the earth terminal of a three-pin plug.
Main parts
- Face plate
- Thread take-up lever (inside)
- Removable extension table (accessories)
- Handle
- Handwheel
- Presser foot lifter
- Stitch balance adjusting screw (underneath the machine)
- Thread cutter
- Buttonhole lever
- Needle threader
- Needle threader lever
- Presser foot release lever
- Presser foot thumb screw
- Presser foot holder
- Presser foot
- Feed teeth
- Needle clamp screw
- Needle thread guide
- Needle
- Needle plate
- Bobbin cover
- Bobbin cover latch
- Top cover
- Stitch pattern chart
- Thread guides
- Spool pin
- Bobbin winding tension disc
- Felt washer
- Auxiliary spool pin holder
- Bobbin winder shaft
- Bobbin winder stop
- Speed control lever
- Reverse stitch button
- Start/stop button
- Needle up/down slow button
- Thread cutter button
- Function buttons
- Liquid crystal display (LCD)
- Scroll up button
- Cursor left button
- Cursor right button
- Scroll down button
- Decorative and letter stitch button
- Utility stitch button
- Edit button
- Drop feed lever
- Power switch
- Terminal box
- Foot control jack
- Foot control
- Power cord
Accessories
The accessories are kept in the storage compartment of the removable extension table.
- Needle pack
- 4 SINGER Class 15 bobbins (1 is in the machine)
- Seam ripper
- Brush
- Auxiliary spool pin with felt washer
- Screwdriver for the needle plate
- Large spool cap
- Small spool cap
Presser feet
- Blind hem foot (D)
- Zipper foot (E)
- Satin stitch foot (B)
- Buttonhole foot (F)
- All purpose foot (A) - on the machine when it arrives
Optional extras (not supplied)
- Walking foot
Walking Foot£29.99 - 1/4" quilting foot
1/4" Quilting Foot£11.99 - Darning / free motion foot - for darning and free motion embroidery with the feed teeth lowered
Darning / Free Motion Foot£12.99 - Invisible zipper foot
Invisible Zipper Foot£11.99 - SINGER twin needles - a twin needle is not supplied
Useful for this
10-piece Presser Foot Kit£29.99
Walking Foot (Even Feed)£29.99
Darning / Free Motion Foot£12.99Extension table, accessory case and free arm
Removing the extension table
Hook your finger under the bottom left side of the removable extension table and slide it to the left. To fit it, push the table to the right.
Opening the accessory case
Hook your finger under the left side of the accessory drawer cover and pull it towards you. Your accessories are stored inside this drawer.
Free arm sewing
Take off the extension table and you can use the free arm. It makes hard-to-reach areas like trouser hems and sleeve cuffs much easier to sew.
Setting up
Changing the presser foot
Change the presser foot to suit the stitch or technique you are sewing.
- Turn the power switch to O (off) before you change the presser foot.
Changing the presser foot
- Turn the handwheel towards you until the needle is at its highest point.
- Raise the presser foot lifter.
- Take off the presser foot by pushing the presser foot release lever towards you.
- Put the foot you want with its pin directly under the slot in the presser foot holder.
- Lower the presser foot lifter and the foot snaps into place.
Removing the presser foot holder
Take off the holder when fitting presser feet that have their own shank, or when cleaning the machine.
- Take off the presser foot.
- Loosen the presser foot thumb screw and take off the presser foot holder.
- To refit the holder, push it up as far as it will go onto the bottom of the presser bar.
- Tighten the thumb screw.
The rest of this manual is for our customers
36 more sections, including step-by-step guides, stitch settings and troubleshooting.
The full manual and our Live Sewing Advisor come free with every machine we sell.
Order a Singer C430 ProfessionalAlready a customer? Log inBought your machine somewhere else? Get the full manual, plus our Live Sewing Advisor for any sewing question, for 30 days.
Get 30 days' access - £10 one-offA one-off payment of £10 for 30 days - no subscription. Instant access by email, including every interactive sewing machine manual we have.
