Your SINGER M2605
Singer's instructions rewritten in plain English, with every setting kept exactly as Singer intended, and with tips from our team added along the way. Stuck on something? Ask the Live Sewing Advisor at any point.
This manual applies to UK spec machines.
Important - please read: getting the best out of your machine
The questions our customers ask us most - worth two minutes before you start.
- 💡Stretch stitches need S1
For the stretch stitches (marked in blue), turn the stitch length dial to S1 as well as choosing the pattern. - 🔄Handwheel mark straight up before threading
Turn the handwheel towards you until the mark on it points straight up - the needle is then at its highest, ready for threading and the needle threader. - 💡Darning plate for buttons and free-motion
There is no feed dog lever - fit the darning plate for sewing on buttons, darning and free-motion work, and take it off again for normal sewing. - ⚡Switch off before you thread or change anything
Turn the power switch to O (off) before threading, changing the needle or foot, or taking out the bobbin. - 📦Keep the box and packaging
Please keep the box and packaging for your machine, should it ever need to be sent away for servicing or repair. - 🔄Stitching problems? Rethread first
If you ever have an issue with stitching, tension, looping or jamming, the first thing to do is rethread the machine. If the issue persists, change the needle and bobbin, clean out the bobbin area, and make sure no thread is stuck anywhere in the thread path or in the bobbin area. If you have tried all of these and are still having issues, please do get in touch with our support team. - 🧹Keep the bobbin area clean
We recommend you clean out your bobbin area with a brush or cotton bud every 4 to 6 bobbin changes, to keep your machine free of lint and debris. - 🔄Change your needle
To keep your machine stitching perfectly, we recommend changing your needle every 6 to 8 hours of sewing. We supply needles in different sizes and for different types of materials - including stretch, jeans/denim, leather, and multiple sizes of universal needles to suit the weight of the fabric. - 🧵Use good thread
Always try to use good quality branded threads such as Gutermann, Coats, Hemline or Mettler. Avoid non-branded threads, such as ones found in supermarkets or on some online marketplaces. - ✅Use the correct bobbin
With very few exceptions, Singer machines use Class 15 plastic bobbins. Always use the type that came with your machine - we recommend genuine bobbins only. Even slight differences in bobbin size or weight can cause the machine not to stitch correctly. - ⚙Let the machine feed the fabric
Modern machines have extremely good feeding mechanisms, designed to pull the fabric through the machine for you. Try to avoid pulling the fabric through to the point of bending the needle, as this can cause the needle to strike the bobbin case or needle plate. - 💬We are here to help
Always feel free to message us for help and advice on how to get the best out of your machine.
Getting to know your machine
Important safety instructions
When using any electrical appliance, basic safety precautions should always be followed, including the ones below. Read all the instructions before using this sewing machine.
Keep these instructions somewhere handy, close to the machine. If you pass the machine on to someone else, give them the instructions too.
This machine is intended for use by adults. It can be used under adult supervision by (i) children aged 8 to 12 and (ii) people with reduced physical, sensory or mental capabilities, or without experience and knowledge, as long as they have been shown how to use it safely and understand the hazards involved. Cleaning and user maintenance must not be done by children without supervision. No one should play with the machine. Children under 8 must not use the machine.
WARNING - to reduce the risk of burns, fire, electric shock or injury
- Never leave the machine unattended while it is plugged in. The socket the machine is plugged into should be easy to reach. Always unplug the machine straight after use, and before cleaning, removing covers, oiling or making any other adjustment mentioned in this manual.
- Do not let the machine be used as a toy. Take close care when it is used by or near children.
- Only use the machine for its intended purpose, as described in this manual. Only use attachments recommended by the manufacturer, as listed in this manual.
- Never use the machine if the cord or plug is damaged, if it is not working properly, or if it has been dropped, damaged or dropped into water. Take it to your nearest authorised dealer or service centre to be examined, repaired or adjusted, electrically or mechanically.
- Never use the machine with any of its air openings blocked. Keep the ventilation openings of the machine and the foot control free from lint, dust and loose cloth.
- Keep your fingers away from all moving parts. Take special care around the needle.
- Always use the correct needle plate. The wrong plate can cause the needle to break.
- Do not use bent needles.
- Do not pull or push the fabric while sewing. It can bend the needle and make it break.
- Wear safety glasses.
- Turn the power switch to O (off) when making any adjustments in the needle area - threading the needle, changing the needle, threading the bobbin, changing the presser foot and so on.
- Never drop or insert any object into any opening.
- Do not use outdoors.
- Do not use where aerosol (spray) products are being used or where oxygen is being given.
- To disconnect, turn all controls to off (O), then take the plug out of the socket.
- Do not unplug by pulling the cord. Hold the plug, not the cord.
- The foot control is used to run the machine. Never put anything else on the foot control.
- Do not use the machine if it is wet.
- If the LED lamp is damaged or broken, it must be replaced by the manufacturer, its service agent or a similarly qualified person, to avoid a hazard.
- If the cord connected to the foot control is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person, to avoid a hazard.
- The noise level in normal use is less than 75dB(A).
Parts of the machine - front
- Thread tension dial
- Presser foot pressure adjustment
- Thread take-up lever
- Thread cutter
- Presser foot
- Needle plate
- Removable accessory tray (accessory storage)
- Reverse sewing lever
- Bobbin winding stopper
- Stitch length dial
- Pattern selector dial
- Needle threader
Unpacking
- Put the box on a steady, flat surface. Lift the machine out of the box and take off the outer packaging.
- Remove all the other packing material and the plastic bag.
Parts of the machine - back
- Horizontal spool pin
- Bobbin winder spindle
- Hole for auxiliary spool pin
- Handwheel
- Power and light switch
- Main plug socket
- Bobbin thread guide
- Upper thread guide
- Face plate
- Handle
- Presser foot lifter
- Foot control (speed)
- Power cord
Connecting to the power
Plug the foot control into the machine and the power cord into the wall socket, as shown (1).
The foot control sets your sewing speed - the harder you press, the faster you sew (3).
Press the main switch (A) to I to turn on the power and the sewing light.
- Unplug the power cord whenever you are not using the machine.
- Only use the foot control supplied with the machine, or one supplied by an approved SINGER retailer.
- If you are unsure how to connect the machine to the power, ask a qualified electrician.
Useful for this
Turtle Foot Control£49.99
The rest of this manual is for our customers
26 more sections, including step-by-step guides, stitch settings and troubleshooting.
The full manual and our Live Sewing Advisor come free with every machine we sell.
Order a Singer M2605Already a customer? Log inBought your machine somewhere else? Get the full manual, plus our Live Sewing Advisor for any sewing question, for 30 days.
Get 30 days' access - £10 one-offA one-off payment of £10 for 30 days - no subscription. Instant access by email, including every interactive sewing machine manual we have.