SINGER M3205 / M3505 Interactive Manual
Interactive instruction manual by Singer Sewing Outlet

Live Sewing Advisor - free for our customers: ask any sewing question about your M3205 and get an answer straight away, 7 days a week. Log in to your order page to use it, or get 30 days' instant access for a one-off £10.

Log in30 days - £10 one-off

Your SINGER M3205 / M3505

Singer's instructions rewritten in plain English, with every setting kept exactly as Singer intended, and with tips from our team added along the way. Stuck on something? Ask the Live Sewing Advisor at any point.

This manual applies to UK spec machines.

SINGER M3205 / M3505
SINGER M3205 / M3505

Important - please read: getting the best out of your machine

The questions our customers ask us most - worth two minutes before you start.

  1. 💡
    Stretch stitches: turn the length dial to S1 or S2
    The stretch stitches are marked in blue. Choose the pattern, then turn the stitch length dial to S1 - or S2 on the M3505 only.
  2. 💡
    Buttonholes: 4-step on the M3205, 1-step on the M3505
    The M3205 sews the buttonhole in 4 steps with the pattern selector dial. The M3505 sews it in one go with the buttonhole foot and buttonhole lever.
  3. 💡
    Needle position differs between the two
    On both, the stitch width dial at 0 puts the needle in the centre for straight stitch. Towards 5 it moves left on the M3505 and right on the M3205.
  4. ⚡
    Switch off before you thread or change anything
    Turn the power switch to O (off) before threading, changing the needle or foot, or taking out the bobbin.
  5. 📦
    Keep the box and packaging
    Please keep the box and packaging for your machine, should it ever need to be sent away for servicing or repair.
  6. 🔄
    Stitching problems? Rethread first
    If you ever have an issue with stitching, tension, looping or jamming, the first thing to do is rethread the machine. If the issue persists, change the needle and bobbin, clean out the bobbin area, and make sure no thread is stuck anywhere in the thread path or in the bobbin area. If you have tried all of these and are still having issues, please do get in touch with our support team.
  7. 🧹
    Keep the bobbin area clean
    We recommend you clean out your bobbin area with a brush or cotton bud every 4 to 6 bobbin changes, to keep your machine free of lint and debris.
  8. 🔄
    Change your needle
    To keep your machine stitching perfectly, we recommend changing your needle every 6 to 8 hours of sewing. We supply needles in different sizes and for different types of materials - including stretch, jeans/denim, leather, and multiple sizes of universal needles to suit the weight of the fabric.
  9. 🧵
    Use good thread
    Always try to use good quality branded threads such as Gutermann, Coats, Hemline or Mettler. Avoid non-branded threads, such as ones found in supermarkets or on some online marketplaces.
  10. ✅
    Use the correct bobbin
    With very few exceptions, Singer machines use Class 15 plastic bobbins. Always use the type that came with your machine - we recommend genuine bobbins only. Even slight differences in bobbin size or weight can cause the machine not to stitch correctly.
  11. ⚙
    Let the machine feed the fabric
    Modern machines have extremely good feeding mechanisms, designed to pull the fabric through the machine for you. Try to avoid pulling the fabric through to the point of bending the needle, as this can cause the needle to strike the bobbin case or needle plate.
  12. 💬
    We are here to help
    Always feel free to message us for help and advice on how to get the best out of your machine.

Getting to know your machine

Important safety instructions

This household sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594. When using any electrical appliance, basic safety precautions should always be followed, including the ones below. Read all the instructions before using this sewing machine. Keep the instructions somewhere handy near the machine, and hand them over if you pass the machine on to someone else.

DANGER - to reduce the risk of electric shock

  • Never leave the machine unattended while it is plugged in. The socket the machine is plugged into should be easy to reach.
  • Always unplug the machine from the socket straight after use, and before cleaning, removing covers, oiling or making any other adjustment mentioned in this manual.

WARNING - to reduce the risk of burns, fire, electric shock or injury

  1. Do not let the machine be used as a toy. Take close care when it is used by or near children.
  2. Only use the machine for its intended purpose, as described in this manual. Only use attachments recommended by the manufacturer, as listed in this manual.
  3. Never use the machine if the cord or plug is damaged, if it is not working properly, or if it has been dropped, damaged or dropped into water. Take it to your nearest authorised dealer or service centre to be examined, repaired or adjusted, electrically or mechanically.
  4. Never use the machine with any of its air openings blocked. Keep the ventilation openings of the machine and the foot control free from lint, dust and loose cloth.
  5. Keep your fingers away from all moving parts. Take special care around the needle.
  6. Always use the correct needle plate. The wrong plate can cause the needle to break.
  7. Do not use bent needles.
  8. Do not pull or push the fabric while sewing. It can bend the needle and make it break.
  9. Wear safety glasses.
  10. Turn the power switch to O (off) when making any adjustments in the needle area - threading the needle, changing the needle, threading the bobbin, changing the presser foot and so on.
  11. Never drop or insert any object into any opening.
  12. Do not use outdoors.
  13. Do not use where aerosol (spray) products are being used or where oxygen is being given.
  14. To disconnect, turn all controls to off (O), then take the plug out of the socket.
  15. Do not unplug by pulling the cord. Hold the plug, not the cord.
  16. The foot control is used to run the machine. Never put anything else on the foot control.
  17. Do not use the machine if it is wet.
  18. If the LED lamp is damaged or broken, it must be replaced by the manufacturer, its service agent or a similarly qualified person, to avoid a hazard.
  19. If the cord connected to the foot control is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person, to avoid a hazard.
  20. This machine is double insulated. Only use identical replacement parts - see Servicing double insulated products below.

Children and people who need help

This machine can be used by children aged 8 and over, and by people with reduced physical, sensory or mental capabilities or without experience and knowledge, if they are supervised or have been shown how to use it safely and understand the hazards involved. Children must not play with the machine. Cleaning and user maintenance must not be done by children without supervision.

The noise level in normal use is less than 75dB(A).

Only use the foot control supplied with the machine, or one supplied by an approved SINGER retailer.

Servicing double insulated products

A double insulated product has two systems of insulation instead of an earth. No earth is provided, and one should not be added. Servicing a double insulated product needs great care and knowledge of the system, and should only be done by qualified service staff. Replacement parts must be identical to the parts in the product. A double insulated product is marked DOUBLE INSULATION or DOUBLE INSULATED.

NoteSave these instructions. This sewing machine is for household use only. This manual can be printed.

Parts of the machine - front

  1. Thread tension dial
  2. Thread take-up lever
  3. Reverse sewing lever
  4. Thread cutter
  5. Presser foot
  6. Needle plate
  7. Removable extension table / accessory storage
  8. Stitch width dial
  9. Bobbin stopper
  10. Stitch length dial
  11. Pattern selector dial
  12. Buttonhole lever (M3505 only)
  13. Needle threader

Unpacking

  • Put the box on a steady, flat surface. Lift the machine out of the box and take off the outer packaging.
  • Take off all the other packing material and the plastic bag.
Drawing from the SINGER manual

Parts of the machine - back

  1. Horizontal spool pin
  2. Bobbin winder spindle
  3. Hole for a second (auxiliary) spool pin
  4. Handwheel
  5. Power and light switch
  6. Main plug socket
  7. Bobbin thread guide
  8. Upper thread guide
  9. Face plate
  10. Handle
  11. Presser foot lifter
  12. Foot control (speed)
  13. Power cord
Drawing from the SINGER manual

Connecting to the power

Plug the foot control into the machine and the power cord into the wall socket, as shown (1).

The foot control sets your sewing speed - the harder you press, the faster you sew (3).

Sewing light

Press the main switch (A) to I to turn on the power and the light.

Safety
  • Unplug the power cord whenever you are not using the machine.
  • Only use the foot control supplied with the machine, or one supplied by an approved SINGER retailer.
  • If you are unsure how to connect the machine to the power, ask a qualified electrician.

Useful for this

Turtle Foot Control£49.99
Drawing from the SINGER manual

The rest of this manual is for our customers

27 more sections, including step-by-step guides, stitch settings and troubleshooting.

The full manual and our Live Sewing Advisor come free with every machine we sell.

Order a Singer M3205 / M3505Already a customer? Log in

Bought your machine somewhere else? Get the full manual, plus our Live Sewing Advisor for any sewing question, for 30 days.

Get 30 days' access - £10 one-off

A one-off payment of £10 for 30 days - no subscription. Instant access by email, including every interactive sewing machine manual we have.