Your SINGER One Plus

Singer's instructions rewritten in plain English, with every setting kept exactly as Singer intended, and with tips from our team added along the way. Stuck on something? Ask the Live Sewing Advisor at any point.

This manual applies to UK spec machines.

Main things to know

Leave the tension on AUTOSinger says 90% of your sewing is done with AUTO showing on the tension dial. Only fine-tune it a little either side if the stitch needs it.Class 15 J bobbins, turning anti-clockwiseThe One Plus has a drop-in bobbin under a clear cover. Use Class 15 J bobbins, and drop the bobbin in so it turns anti-clockwise when you pull the thread.Foot control or Start/Stop button - not bothWhen the foot control is plugged in, the Start/Stop button does not work. The speed lever sets the sewing speed, or the top speed when you use the foot control.Twin needle? Press the twin needle button firstPress the twin needle safety button before you choose a stitch. It reduces the stitch width automatically and skips stitches that are not suitable for a twin needle.A beep or a C code? Check the presser footThe machine beeps and shows C07 if you start sewing with the presser foot up. Lower the foot and sew. The other codes are listed under Helpful messages.Keep the box and packagingIf your machine ever needs to go to Singer’s warranty department or our service department, it must travel in its original box and inner packaging.

Getting to know your machine

Important safety instructions

When using an electrical appliance, basic safety precautions should always be followed, including the ones below. Read all the instructions before using this sewing machine.

DANGER - to reduce the risk of electric shock

Never leave the sewing machine unattended while it is plugged in. Always unplug it from the socket straight after use and before cleaning.

WARNING - to reduce the risk of burns, fire, electric shock or injury

Do not let the machine be used as a toy. Take close care when it is used by or near children.
This appliance is not intended for use by people (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction on using it by a person responsible for their safety. Children should be supervised to make sure they do not play with the machine.
Only use the machine for its intended purpose, as described in this manual. Only use attachments recommended by the manufacturer, as listed in this manual.
Never use the machine if the cord or plug is damaged, if it is not working properly, or if it has been dropped, damaged or dropped into water. Take it to your nearest authorised dealer or service centre to be examined, repaired or adjusted, electrically or mechanically.
If the power cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person, to avoid a hazard.
Never use the machine with any of its air openings blocked. Keep the ventilation openings of the machine and the foot control free from lint, dust and loose cloth.
Never drop or insert any object into any opening.
Use indoors only.
Do not use where aerosol (spray) products are being used or where oxygen is being given.
To disconnect, turn the switch to off (O), then take the plug out of the socket.
Switch off or unplug the machine when you leave it unattended. Unplug it before doing any maintenance or replacing lamps.
Do not unplug by pulling the cord. Hold the plug, not the cord.
Keep your fingers away from all moving parts. Take special care around the needle.
Never sew with a damaged needle plate - it can cause the needle to break.
Do not use bent needles.
Do not pull or push the fabric while sewing. It can bend the needle and make it break.
Turn the power switch to O (off) when making any adjustments in the needle area - threading the needle, changing the needle, threading the bobbin, changing the presser foot and so on.
Always unplug the machine from the socket when removing covers, oiling, or making any other user servicing adjustment mentioned in this manual.
To avoid electric shock, never put the machine, the power cord or the plug into water or any other liquid.
The LED lamp's maximum power is 0.3W and maximum voltage DC 5V. If the LED lamp is damaged, stop using the machine and send it to the manufacturer or service agent to be repaired or replaced straight away.
Caution - to avoid injury, unplug the foot control when you leave the machine unattended, and before carrying out any maintenance.
Caution - moving parts. To reduce the risk of injury, switch off before servicing. Close the cover before using the machine.
Only use the foot control supplied with the machine, or one supplied by an approved SINGER retailer.

NoteThis product is for household use, or equivalent. Please keep these instructions. When you dispose of the machine, it must be recycled safely in line with the rules for electrical and electronic products - if in doubt, ask your retailer. This manual can be printed.

Parts of the machine

Pre-tension guide
Bobbin winding tension disc
Thread tension control
Threading lever (for the automatic needle threader)
Face cover
Thread cutter / holder
Extension table (accessory box)
Bobbin winder shaft
Bobbin winder stop
Reverse stitch button
Horizontal spool pin
Handle
Handwheel
Power / light switch
Cord socket
Identification plate
Extension table release button
Presser foot lifter
Feed dog control
Buttonhole lever
Twin thread guide
Thread guide
Presser foot screw
Needle
Bobbin cover plate
Needle bar
Alternate thread cutter
Foot release button
Needle clamp screw
Presser foot
Feed dogs
Needle plate
Bobbin cover release button
Power cord
Foot control
Instruction manual

Accessories

Supplied with the machine

Needles
Bobbins - when you buy more, make sure they are Class 15 J
Auxiliary spool pin
Spool pin felt discs
Spool pin cap (small)
Spool pin cap (medium)
Spool pin cap (large)
Buttonhole opener / seam ripper and brush
Screwdriver for the needle plate
Zipper foot
Satin stitch foot
Blind hem stitch foot
Buttonhole foot and underplate

The foot that comes on the machine is the all-purpose foot, and you will use it for most of your sewing. The satin stitch foot (11) is another very useful foot - use it for most of your decorative sewing, especially stitches like honeycomb and star.

Optional extras (not supplied)

SINGER 3mm twin needle (style 2025) - Singer's recommended twin needle for this machine
SINGER wing needle (style 2040) - for the entredeux stitch
Walking footWalking Foot£29.99
1/4" quilting foot1/4" Quilting Foot£11.99
Invisible zipper footInvisible Zipper Foot£11.99

Useful for this

10-piece Presser Foot Kit£29.99

Walking Foot (Even Feed)£29.99

Setting up and connecting to the power

Before you use the machine for the first time, wipe off any spare oil from the needle plate area.

Power cord and foot control

Set the power / light switch to OFF.
Plug the power cord into the cord socket on the machine (1), then into the wall socket (2), as shown.
Plug the foot control plug (3) into the machine socket.

NoteWhen the foot control is unplugged, the machine will not run.

Power / light switch

The machine will not run until the power / light switch is turned on. The same switch controls both the power and the light.

Safety

Always disconnect the machine from the power by taking the plug out of the socket when servicing it, changing needles and so on.
Only use the foot control supplied with the machine, or one supplied by an approved SINGER retailer.

Spool pins

Horizontal spool pin - for normal reels of thread

Put the reel of thread on the pin and hold it in place with a spool cap, so the thread flows smoothly. If the reel has a thread retaining slit, it should be on the right.

Choose the right spool cap (small, medium or large) for the type and size of reel. The spool cap should always be bigger than the end of the reel.

Vertical spool pin - for large reels of thread

Fit the auxiliary spool pin, put a felt disc over it, then put the reel of thread on the pin.

Presser foot lifter, feed dogs and free arm

Presser foot lifter

The presser foot has three positions:

Lower the presser foot to sew.
Raise the lifter to the middle position to put in or take out fabric, and to change the presser foot.
Lift it to its highest position to put in or take out thick fabric.

NoteIf you start the machine with the presser foot raised, it beeps to remind you to lower the presser foot.

Feed dog control

The feed dogs move the fabric as you sew. Keep them raised for all general sewing. Lower them for darning, freehand embroidery and monogramming, so that you move the fabric instead of the feed dogs. To lower the feed dogs, take off the extension table and push the feed dog lever towards the machine.

Free arm sewing

With the extension table in place you have a large flat working surface. To take the table off, hold it firmly with your left hand and pull it off to the left while pushing the release button (A) with your right hand. To put it back, slide it into place until it clicks.

With the table off, the machine becomes a slim free arm for sewing children's clothes, cuffs, trouser legs and other hard-to-reach places.

Threading

Continue reading

Hold the thread lightly and turn the handwheel towards you until the needle reaches its highest point. Raise the presser foot and guide the thread through each point in turn, checking it sits in the tension discs.

Choose your setting, sew a few stitches on a scrap of the same fabric and look at both sides. Adjust a little at a time until the stitches lie flat and even.

Switch the machine off at the power switch.
Raise the needle and the presser foot.
Follow the guide for your model shown in the drawing.
Check the result before you start your project.

Next steps

Choose your setting, sew a few stitches on a scrap of the same fabric and look at both sides. Adjust a little at a time until the stitches lie flat and even.

Switch the machine off at the power switch.
Raise the needle and the presser foot.
Follow the guide for your model shown in the drawing.
Check the result before you start your project.

Choose your setting, sew a few stitches on a scrap of the same fabric and look at both sides. Adjust a little at a time until the stitches lie flat and even.

Switch the machine off at the power switch.
Raise the needle and the presser foot.
Follow the guide for your model shown in the drawing.
Check the result before you start your project.

The rest of this manual is for our customers

30 more sections, including step-by-step guides, stitch settings and troubleshooting.

The full manual and our Live Sewing Advisor come free with every machine we sell.

Order a Singer One Plus Already a customer? Log in

Bought your machine somewhere else? Get the full manual, plus our Live Sewing Advisor for any sewing question, for 30 days.

Get 30 days' access - £10 one-off

A one-off payment of £10 for 30 days - no subscription. Instant access by email, including every interactive sewing machine manual we have.